POLYBIT POLYCRYL FR

Acrylic based, class A fire rated, flexible vapor proof protective coating

• Class A fire rated

• Environmentally friendly. Low VOC

• Single component

POLYBIT POLYCRYL FR

Features and benefits

Acrylic based single component, class A fire-rated protective coating especially designed as moisture vapor barrier on facades application.

Properties

• Class A fire rated

• Environmentally friendly. Low VOC

• Single component

• Good abrasion resistance properties

• Excellent adhesion on most porous and nonporous substrates

• Excellent resistance to vapor and moisture

Description

POLYBIT® POLYCRYL FR Can be used as vapor / damp proof coating for facade cladding system, damp proof membrane is sandwich constructions , vapor proof barrier coating for interior & exterior floor & walls.
Available pack size: 15L

Polybit Polycoat

POLYBIT Polycoat

Bitumen emulsion paint

Emulsified thixotropic bitumen protective coating. The coating dries to form a black flexible protective film. The finished film forms a tough barrier to vapor transmission.

• Easy to apply

• cold applied

• adheres to concrete, metal, wood, cork etc

• water based

• versatile

• anti fungal

The application can be done
with a roller, brush or airless spray. Apply the coating at
a coverage rate of 1-4 m2/L/coat, depending on the dry
film thickness required. For highly demanding situations,
it is recommended to apply in multiple coats.

The coating shall be protected from ongoing site activities
and during backfilling from getting damaged by a 150
micron polyethylene sheet.

POLYBIT Bitutape Primer

POLYBIT Bitutape Primer

Solvent based bitumen primer

• Improves the adhesion between bitumen based sheet membranes and coatings

• Cold applied, does not require heating

• Binder for dust particles

A premium quality, quick drying, solvented bituminious primer conforming to ASTM D 41, used for priming pipes prior to application, pipe wrapping tape systems.

Properties

• Improves the adhesion between bitumen based sheet membranes and coatings

• Cold applied, does not require heating

• Binder for dust particles

• Anti corrosive

• Conforms to the following standards

• ASTM D 41 - Asphalt primer for roofing, damp proofing and waterproofing

Description

POLYBIT® BITUTAPE PRIMER provides an effective primer coat prior to application of anti–corrosive pipe wrapping tapes. BITUTAPE PRIMER is resistant to concentrations of alkalis and acids and can withstand prolonged oxidation. Available pack size: 20L .

POLYBIT Bitubond N

Single component solvent based
synthetic rubber

• Excellent heat resistance

• Single component, easy to apply

• Designed to use in tropical climates

• Features and benefits

POLYBIT Bitubond N

Adhesive for bonding bitumen fiber board bitumen plastic laminates veneer boards rubber and plastic edging strips rubber leather foam to wood chipboard concrete stone metals and bitumen surfaces.

Properties

• Excellent heat resistance

• Single component, easy to apply

• Designed to use in tropical climates

• Can be applied by brush or scrapper

Description

POLYBIT® BITUBOND N is a single component solvent based synthetic rubber adhesive. Used as an adhesive for bonding bitumen fiber boards, bitumen felt, plastic, laminates, veneer boards, rubber and plastic edging strips, rubber, leather, linoleum, felt, cork, foam to wood, chipboard, concrete, stone, metals and bitumen surfaces.

POLYBIT Easybit

Bitumen emulsion

• Moisture Barrier

• Easy to apply

• Non- flammable

POLYBIT Easybit Bitumen Emulsion

Features and benefits

Thixotropic flexible protective barrier to water and vapor transmission for below ground concrete structures which are above the water table.

Properties

• Moisture Barrier

• Easy to apply

• Non- flammable

• Cold applied

Description

POLYBIT® EASYBIT is used for providing waterproofing and dampproofing for below ground concrete structures which are above the water table. The coating is also used as a moisture vapor barrier on block works and concrete surfaces prior to cladding. Available Pack: 140kg. drums

POLYBIT POLYASPHALT 60/70

Penetration grade bitumen

• Hot applied

• Excellent barrier against penetration of water

• Excellent resistance to chlorides and sulphates

Features and benefits

A penetration grade bitumen used as a paving grade bitumen used for the construction of roads and asphalt pavements. This is also used as a protective and waterproofing coating on concrete surfaces.

Properties

• Hot applied

• Excellent barrier against penetration of water

• Excellent resistance to chlorides and sulphates

• Conforms to the following standards: ASTM D 946, AASHTO M 20, BS 3690

Description

POLYBIT® POLYASPHALT can be used in waterproofing below ground block work, concrete structures prior to back filling, road construction and maintenance of flexible pavements. Available sizes: 140KG.

POLYBIT POLYASPHALT 60/70

POLYBIT POLYCOAT RBE

Rubberized bitumen emulsion

• Cold applied

• Single component, easy to apply

• Can be used in both dry and damp substrates

POLYBIT POLYCOAT RBE

Features and benefits

Emulsified rubber modified bitumen coating, which dries to form a tough, seamless, flexible vapor proof protective coating. Conforms to the requirement of ASTMD 1227 Type lll, class 1.

Properties

• Cold applied

• Single component, easy to apply

• Can be used in both dry and damp substrates

• Can be applied in closed or confined areas

• Water based

• Joint free

Description

POLYBIT® POLYCOAT RBE Can be used for a wide variety of applications, which includes the following: – protective coating on concrete foundations – curing compound on freshly cast concrete structures – dampproof membrane in sandwich constructions – vapor proof barrier coating. Available sizes: 20L, 200L

It is highly recommended to apply a priming coat prior
to the application of the Polycoat RBE coating on the
substrate. The primer can be applied to damp or
freshly cast concrete surfaces.For highly demanding situations, it
is recommended to apply in multiple coats. On vertical areas, it is recommended
to apply the coating in multiple layers.

RBE 15

RBE 10

RBE 05

RBE 1000

POLYBIT POLYPRIME SB

Solvent based bitumen primer

• Improves the adhesion of bitumen based sheet
  membranes and coatings

• Cold applied, does not require heating

• Binder for dust particles

• Features and benefits

POLYBIT POLYPRIME SB

Features and benefits

A quick drying solvent based low viscosity bitumen primer. It is used as a primer coat on masonry and concrete substrates to improve the adhesion of bitumen based membranes and coatings.

Properties

• Improves the adhesion of bitumen based sheet
  membranes and coatings

• Cold applied, does not require heating

• Binder for dust particles

• Binder for dust particles

• Conforms to ASTM D41 - Asphalt primer for roofing, damp proofing and waterproofing

Description

POLYBIT® POLYPRIME SB is used as a primer and sealer coat prior to the application of bitumen based waterproofing membranes and coatings. Available sizes: 16L. 20L. 200L

How to use

Surface Preparation

The surface shall be cleaned thoroughly of all contaminants
like dust, traces of curing compound, oil and grease. All
surface imperfections, nail head protrusions, structurally
unsound and friable concrete shall be removed and
repaired with a suit-able Polycrete* concrete repair mortar.
The surface must be dry before priming with Polyprime SB.

Application

Mix the contents of the pail or drum for a few minutes to
remove any sediments. apply the primer @4-6 m²/L to a
clean smooth and dry surface by brush/roller. Allow the
primer to dry prior to the application of the membrane.
For highly porous surfaces application of a second coat is
recommended.